Support in Hebrew, Support in Russian    <<   Support Forum  >>

Support

Video Tutorials:

Signup, Radio Install and Transmiting - Click Here

Designing you page - Click Here


Premium Video Tutorials:

Premium Service - why choose us? and how order? - Click Here

Premium Radio Panel - Click Here

Auto DJ - Click Here



 General:
 1. Site's and radio administration regulations.

 Listening:
 1. Written "loading" but the radio won't work?

 Broadcast:
 1. How to broadcast and with what program?
 2. The broadcast jumps and doesn't stream, what do I do?
 3. Why can't you connect to my radio with Winamp and other music programs?
 4. How do I broadcast with a microphone? (soon)

 Accounts:
 1. I can't login to my account
 2. I forgot my usernames' password

 For questions that are not here, or if this page didn't help you solve your problem, go
  to the forum and try there http://forum.listen2myradio.com
 

 

 

General

1.
Terms of use

LISTEN2MYRADIO.COM does not take responsibility for any broadcasts. LISTEN2MYRADIO.COM may and will close any radio at any time without a warning. LISTEN2MYRADIO.COM may and will cancel any radio in case of a crime/illegal use, or if we will receive a complaint.
Complaints should be sent to: abuse@listen2myradio.com and it will be dealt as soon as possible.
Every user (broadcaster and listener) must agree to these terms, if you do not agree please disconnect from this site immediately.
Thank you,
LISTEN2MYRADIO.COM staff.

 

 


Listening

 1. Written "loading" or "ready" but the radio won't work?
 Answer: If "loading" or "ready" appears but the player won't play
this is what you do:

   1. Put your cursor over the player and press your mouses' right button, in the menu choose "Options".

2. In the "Options" window, go to "Network"
This is how the changes supposed to look when you're done

3.Press once on MMS and then "Configure" (that is under the tabulate), choose the option Autodetect (it's the first choice) and confirm in the all the windows (press OK).

4. Refresh the page (F5) and the player will connect to the radio.



Broadcast


 1. How to broadcast and with what program?
 Answer: To broadcast you will need to use the program Winamp, there are  
 computers in which the plug-in works with version 5 and there are computers in
 which the plug-in works only in version 2.9.

 To download Winamp version 5 press here
 To download winamp version 2.9 press here


 2. Now, download the plug-in for broadcast through Winamp program.
 Press here to download the plug-in and start the short installation.

 3. After installing the plug-in, open Winamp program and press the keys CTRL
 and P at once. A window will open, in that window press the line "DSP/Effect"
 that is on the left, and then on the line "Nullsoft SHOUTcast Source DSP v1.8.2b"
 which is on the right.




4. Now the broadcast window will open.
In that window you'll need to input a few details about your server host.

5. Let's start inputing the server details, for that go to Output tab.
 A. In the "Address" field delete the written line (localhost) and write the address of your server, for example: 80.179.150.93

  B. In the "Port" field write the port of your radios' server, that you received from the site.

C. In the "Password" field write your broadcast password.
Notice there are 2 passwords, one for Admin and one for broadcast, here you write only the broadcast password.

  6. Go to "Encoder" tab, and choose the quality of the brodacast.
 The quality of the broadcast that is suggested in fast internet servers is not more than 64kbps.
 Because a common upload speed is 14kbps, and if the quality will be higher than 64, the songs will jump and ruin the whole broadcast.

7. To start the broadcast go back to the Output tab and press "Connect", naturally the songs must be played from your winamp Playlist.


 Tips:
 1. To check the current number of your radios' listeners go to http://ip:port
  instead of the "ip" write the ip of the broadcast, then the punctuation ":", and  
  then the port.
  You can also see the number of listeners on the main page of the site.

 2. If you can't connect to the server after you followed the given above and filled
 everything needed to be filled and did everything in order, check if there is a
 Firewall or Router that blocks. Also it's suggested to turn p2p programs aswell
 (such as e- mule).



2. The broadcast jumps and doesn't stream, what do I do?
Answer: Please change the broadcast speed (quality) to the suggested one that isn't more than 64kbps in fast servers.
 Because a common upload speed is 14kbps, and if the quality will be higher than 64, the songs will jump and ruin the whole broadcast.



3. Why can't you connect to my radio with Winamp and other
 Answer: You cannot connect to the sites' servers with an external program!!!, the listening must apply only through the sites' pages.
The site benefits from commercials, so if you listen to a radio without viewing commercials (banners), the site won't benefit and site's close when they make no profit. We want the site to grow and improve it, that's why we need to make money to invest in servers that cost alot, therefore we have no choice but to make the listeners watch commercials while they are listening to a radio.



Accounts

1. I can't login to my account
Answer: Send an Email with your username and your account will be checked, you'll receive an answer to the Email you signed up with after a few days. The Email for contacting us is: admin@listen2myradio.com


2. I forgot my usernames' password
Answer: Send an Email with your username and the password will be sent to the Email you signed up with after a few days. The Email for contacting us is: admin@listen2myradio.com
 


 

Terms of Use   Privacy Policy
All rights reserved to listen2myradio.com